LED Strip Connectors: Mini Pierce Connectors for COB and SMD Strips

<strong>Mini pierce connectors · 2–6 pins · 5/8/10/12 mm boards · strip-to-strip, strip-to-wire, single-end and middle leads, L and T corners · max current 4–6 A</strong>

HST Light’s LED Strip Connectors are a mini pierce connector range for professional B2B lighting projects.

A mini pierce connector joins an LED strip without soldering. Its contact pins pierce the strip surface to reach the copper pads, so two strip ends — or a strip and a wire — connect by pressing the connector closed. For background on connector types, see the electrical connector overview on Wikipedia. The range covers single-colour, dual-CCT, RGB, RGBW and RGBWW strips on 5, 8, 10 and 12 mm boards, with strip-to-strip, strip-to-wire, single-end lead, middle lead, L-type and T-type joints.

This page lists the LED strip connectors range by joint type, strip type, pin count and board width. Sensor switches (door control, hand-sweep, touch and human presence) are listed separately on the Smart Sensor Modules page.

LED strip connectors - strip connection detail

LED Strip Connectors: Mini Pierce Connector Family Overview

The LED strip connectors range is built around one idea: no soldering, no tools. Each connector is sized by three things — pin count, board width and joint type. The pin count follows the strip (2-pin single-colour, 3-pin dual-CCT, 4-pin RGB, 5-pin RGBW, 6-pin RGBWW), and the board width follows the strip PCB (5, 8, 10 or 12 mm).

Joint types in these LED strip connectors: strip-to-strip joins two ends in a straight run; strip-to-wire (DIY, no lead attached) starts a run from a power feed; single-end leads bridge a gap with a 15 cm lead; middle leads feed power mid-run with a 15 cm lead; L and T joints turn corners; 4-in-1 connectors join four strip ends at one point; wire-to-wire connectors join two leads. Maximum current is 4–6 A per model — see the joint-type tables. Wire gauge for lead versions is 20–24 AWG per model; confirm the lead length and wire colour order before ordering.

LED Strip Connectors Range by Joint Type

Available LED strip connectors combinations below, grouped by joint type. Match the pin count to the strip, the board width to the strip PCB, and the joint type to the installation. Prices are quoted per order — contact us for a quotation.

Strip-to-Strip

Strip typePinsBoard width
COB4-pin10 mm
COB5-pin12 mm
COB6-pin12 mm
SMD2-pin10 mm
SMD2-pin12 mm
SMD3-pin8 mm
SMD3-pin10 mm
SMD3-pin12 mm
SMD4-pin8 mm
SMD4-pin10 mm
SMD5-pin10 mm
SMD5-pin12 mm
SMD6-pin12 mm
Single-colour COB (SC)2-pin5 mm
Single-colour COB (SC)2-pin8 mm
Single-colour COB (SC)2-pin10 mm
Single-colour COB (SC)4-pin12 mm

Strip-to-Wire (DIY)

Strip typePinsBoard width
COB4-pin10 mm
COB5-pin12 mm
COB6-pin12 mm
SMD2-pin10 mm
SMD2-pin12 mm
SMD3-pin8 mm
SMD3-pin10 mm
SMD3-pin12 mm
SMD4-pin8 mm
SMD4-pin10 mm
SMD5-pin10 mm
SMD5-pin12 mm
SMD6-pin12 mm
Single-colour COB (SC)2-pin5 mm
Single-colour COB (SC)2-pin8 mm
Single-colour COB (SC)2-pin10 mm
Single-colour COB (SC)4-pin12 mm

Single-End Lead

Strip typePinsBoard width
COB3-pin10 mm
COB4-pin10 mm
COB5-pin12 mm
COB6-pin12 mm
SMD2-pin10 mm
SMD2-pin12 mm
SMD3-pin8 mm
SMD3-pin10 mm
SMD3-pin12 mm
SMD4-pin8 mm
SMD4-pin10 mm
SMD5-pin10 mm
SMD5-pin12 mm
SMD6-pin12 mm
Single-colour COB (SC)2-pin5 mm
Single-colour COB (SC)2-pin8 mm
Single-colour COB (SC)2-pin10 mm
Single-colour COB (SC)3-pin8 mm
Single-colour COB (SC)4-pin12 mm

Middle Lead

Strip typePinsBoard width
COB3-pin10 mm
COB4-pin10 mm
COB5-pin12 mm
COB6-pin12 mm
SMD2-pin10 mm
SMD2-pin12 mm
SMD3-pin8 mm
SMD3-pin10 mm
SMD3-pin12 mm
SMD4-pin8 mm
SMD4-pin10 mm
SMD5-pin10 mm
SMD5-pin12 mm
SMD6-pin12 mm
Single-colour COB (SC)2-pin5 mm
Single-colour COB (SC)2-pin8 mm
Single-colour COB (SC)2-pin10 mm
Single-colour COB (SC)4-pin12 mm

L-Type Corner

Strip typePinsBoard width
COB4-pin10 mm
Single-colour COB (SC)2-pin5 mm
Single-colour COB (SC)2-pin8 mm
Single-colour COB (SC)2-pin10 mm

T-Type Corner

Strip typePinsBoard width
Single-colour COB (SC)2-pin8 mm
Single-colour COB (SC)2-pin10 mm

4-in-1 Connectors

Strip typePinsBoard width
Single-colour COB (SC)2-pin8 mm
Single-colour COB (SC)2-pin10 mm

Wire-to-Wire

Strip typePinsBoard width
SMD6-pin12 mm
Single-colour COB (SC)2-pin8 mm

Also in the Range: Same-Width, DuPont & Waterproof Types

TypeStrip typePinsBoard width
Same-width connectorCOB4-pin10 mm
Same-width connectorSingle-colour COB (SC)2-pin10 mm
Same-width connectorSingle-colour COB (SC)2-pin8 mm
Same-width connectorSMD2-pin5 mm
Same-width connectorSMD5-pin10 mm
DuPont wire connectorSingle-colour COB (SC)2-pin10 mm
DuPont wire connectorSingle-colour COB (SC)2-pin5 mm
DuPont wire connectorSingle-colour COB (SC)2-pin8 mm
Waterproof L-type / end plugSingle-colour COB (SC)2-pin10 mm
Waterproof L-type / end plugSingle-colour COB (SC)2-pin8 mm
LED strip connectors - free-cut COB LED strip the connectors join

How to Choose an LED Strip Connector

1. Count the pins. LED strip connectors match the strip: a 2-pin strip (single-colour) takes a 2-pin connector; a 3-pin strip (dual-CCT) takes a 3-pin connector; RGB takes 4 pins, RGBW takes 5 pins and RGBWW takes 6 pins. A connector with the wrong pin count will not fit.

2. Measure the board width. LED strip connectors come in 5, 8, 10 and 12 mm. Measure the strip PCB — not the cover — and pick the matching width.

3. Pick the joint. In LED strip connectors, strip-to-strip joins two ends in a straight run; strip-to-wire starts a run from a power feed; single-end and middle leads bridge a gap or feed power mid-run; L and T joints turn corners. For a die-cut board, use the L-type variants made for die-cut boards.

4. Check the current. Each of these LED strip connectors is rated 4–6 A. For a long or high-power run, split the feed or use a higher-rated joint — do not exceed the rating.

Applications

  • Cabinet and shelf lighting — LED strip connectors joining cut strip ends inside a profile run.
  • Signs and displays — corner joints for letters and outlines.
  • Cove and ceiling runs — middle leads for power feeds mid-run.
  • Retail and exhibition — tool-free joins for fast installation and rework.

Customization Options

Lead length, wire gauge and wire colour order on these LED strip connectors can be customized per order. Mixed pin-count and mixed-width kits are available for installers. Contact us with the strip type and the joint layout for a matched kit.

Technical & OEM Support

Send the strip type (LED type, pin count, PCB width) and the joint layout, and we will match the LED strip connectors before quoting. OEM packaging and private-label kits are available. For the strip itself, see the free-cut COB strip and the 48V long-run COB strip.

Need LED Strip Connectors?

Tell us the strip type and how many joints you need — we will confirm the match and quote the kit.

Ordering Information

MOQ: No minimum order for standard products; samples welcome. Sample Lead Time: 3–5 days. Bulk Order Lead Time: 10–20 days. Warranty: 3 years standard, 5 years premium. Compliance: CE and RoHS compliant. Customization: Length, finish and cover can be customized; OEM projects are quoted case by case. Payment &amp; Shipment: To be confirmed per order – contact us for details.

Frequently Asked Questions

What is a mini pierce LED strip connector?

LED strip connectors are connectors that join an LED strip without soldering. Its contact pins pierce the strip surface to reach the copper pads, so a strip end — or a strip and a wire — connects by pressing the connector closed.

How do I choose the pin count?

Match the pins to the strip: 2-pin for single-colour, 3-pin for dual-CCT, 4-pin for RGB, 5-pin for RGBW and 6-pin for RGBWW. For example, a 4-pin connector for a 10 mm board fits an RGB strip on a 10 mm PCB.

How do I choose the board width?

Measure the strip PCB width and pick the matching connector: 5, 8, 10 or 12 mm. Measure the PCB itself, not the cover or the diffuser.

What is the maximum current?

4–6 A per connector. Do not exceed the rating; for a long or high-power run, split the feed or use a higher-rated joint.

Related Products

Free-Cut COB LED Strip

View product →

48V Long Run COB LED Strip

View product →

Smart Sensor Modules

View product →

LED Controllers & Dimmers

View product →

Complete Your Setup

LED Power Supplies

Pair the product with a matching constant-voltage driver sized for the run.

LED Controllers & Dimmers

Add a matching controller for dimming or colour control, per model.

Free-Cut COB LED Strip

Pair the product with a free-cut COB strip that can be cut anywhere.