COB RGB / RGBW / RGBCCT LED Strips

COB RGB, RGBW and RGBCCT LED strips for colour-changing projects — a 5 mm RGB strip and addressable RGB and RGBW COB strips from HST Light.

COB RGB / RGBW / RGBCCT LED strips combine high-density COB construction with colour-changing control. The COB surface gives a smooth, continuous line of light without the visible LED points of a conventional strip, so colour effects stay even when the strip is viewed up close.

This page brings together HST Light’s colour-changing COB LED strips: an ultra-narrow 5 mm RGB COB strip for compact architectural and display applications, and two addressable COB strips — an RGB model at 600 LEDs/m and an RGBW model at 800 LEDs/m with a dedicated white channel. All three models run on 24V DC. An RGBCCT model is not listed as a standard product here; if your project needs RGB plus a tunable white channel, tell us the CCT or colour you need and we can discuss a custom configuration.

24V DC · RGB / Addressable RGB / Addressable RGBW · 576–800 LEDs/m · CE / RoHS

Why COB RGB / RGBW / RGBCCT LED Strips?

COB RGB / RGBW / RGBCCT LED strips are often installed where the light line itself is visible — in coves, on shelf edges and in furniture — so the quality of the line matters as much as the colour range. Dense COB construction provides a continuous visual line suited to close-view installations.

  • Smooth, dot-free colour. High-density COB construction gives a continuous visual line without the visible LED points of conventional pixel strips, so colour effects stay even along the strip.
  • Colour plus a dedicated white channel. RGBW adds a dedicated white channel to programmable colour effects for more flexible scenes, so one strip can provide both colour effects and white light.
  • Programmable effects on the addressable models. The addressable RGB and RGBW strips use SPI control for programmable, dynamic colour effects, while the 5 mm RGB strip uses RGB control for whole-strip colour change.
  • Built for project orders. All three strips are 24V DC models based on HST Light’s confirmed platforms for professional B2B lighting projects, and voltage, CCT or colour, cable length, connector and packaging can be configured for a project. Pre-production sample verification is available before volume orders.

For project orders for COB RGB / RGBW / RGBCCT LED strips, tell us the colour system, installation length and controller you plan to use, so we can identify the right configuration. Pre-production testing with the intended controller and installation length is recommended before finalising an addressable installation.

COB RGB / RGBW / RGBCCT LED Strips

5mm RGB COB LED Strip 576 LEDs/m - main product image

5mm RGB COB LED Strip 576 LEDs/m

24V DC · 576 LEDs/m · 10 W/m · 5 mm PCB · 31.25 mm cut. Model HST-FCOB576-5-DC24V.

24V Addressable RGB COB LED Strip 600 LEDs/m - main product image

24V Addressable RGB COB LED Strip 600 LEDs/m

24V DC · 600 LEDs/m · 23 W/m · 10 mm PCB · 50 mm cut. SPI control. Model HST-FCOB600-10-DC24V.

24V Addressable RGBW COB LED Strip 800 LEDs/m - main product image

24V Addressable RGBW COB LED Strip 800 LEDs/m

24V DC · 800 LEDs/m · 30 W/m · 12 mm PCB · 50 mm cut. SPI control. Model HST-FCOB800-12-DC24V-30W.

COB RGB LED Strip - multicolor light loops

Choosing between RGB, RGBW and RGBCCT in COB RGB / RGBW / RGBCCT LED strips

Choosing between the three colour systems in COB RGB / RGBW / RGBCCT LED strips starts with how the strip will be used. RGB mixes red, green and blue channels (see the RGB colour model) to produce colour across the whole strip, and it suits signs, outlines and accent lighting where white light is not needed. RGBW adds a dedicated white channel, so one strip can switch between colour effects and white light. RGBCCT adds a tunable white channel alongside RGB, which suits projects that need both colour scenes and adjustable white light.

The second question is whether the colour should change across the whole strip or pixel by pixel. The 5 mm RGB model in these COB RGB / RGBW / RGBCCT LED strips changes colour across the whole strip with RGB control. The addressable RGB and RGBW models use SPI control, so different sections of the strip can show different colours and dynamic effects. If the design calls for chasing, gradients or segmented scenes, an addressable model is the right starting point.

  • RGB: whole-strip colour change with RGB control; the 5 mm model suits compact architectural and display applications.
  • RGBW: programmable colour effects plus a dedicated white channel, so one strip covers both colour scenes and white light.
  • RGBCCT: RGB plus a tunable white channel; not a standard model here, so it is discussed as a custom configuration.

An RGBCCT model is not listed as a standard product here, so a project that needs RGB plus a tunable white channel should be discussed as a custom configuration. Tell us the CCT range or the white colour you need, together with the installation length and the controller you plan to use, and we can confirm whether a custom configuration of these COB RGB / RGBW / RGBCCT LED strips is possible before you commit to samples.

If the installation mixes colour scenes with everyday white light, RGBW or RGBCCT is usually the better fit than RGB alone, because the white channel carries the everyday lighting and the colour channels carry the scenes. For a single-colour accent or a sign outline, RGB alone is enough and keeps the control simpler. When in doubt, describe the scenes the strip must produce and ask which of the three systems matches them.

Controllers and wiring for COB RGB / RGBW / RGBCCT LED strips

Controller choice is part of the specification for COB RGB / RGBW / RGBCCT LED strips, not an afterthought. The 5 mm RGB strip uses RGB control for whole-strip colour change, while the addressable RGB and RGBW strips use SPI control for programmable, dynamic effects. Before ordering, confirm the controller, the data protocol and the grouping or pixel configuration with the controller you plan to use, because an addressable installation depends on all three matching.

Pre-production testing with the intended controller and installation length is recommended before finalising an addressable installation. A short sample run on the bench shows whether the controller drives the strip as expected and whether the effect looks right at the planned length. It is cheaper to find a mismatch at sample stage than after the full order has been installed.

Plan the wiring at the same time as the controller. Cable length, cable exit direction and connector can be configured for a project, and the power feed should suit the total installation length. A sample verified with the intended controller and the planned length is the simplest way to confirm that the wiring and control work together before a volume order.

Power and length should be planned together. All three standard models run on 24V DC, and the power per metre differs by model, so the total load depends on the model and the installed length. Confirm the power supply and the feed arrangement with the planned length before ordering, and verify the full setup on a sample run where the installation is long or the effect is complex. Where a run is long, confirm the feed arrangement on the sample as well, so the brightness stays even from the first metre to the last.

Where to install COB RGB / RGBW / RGBCCT LED strips

COB RGB / RGBW / RGBCCT LED strips are often installed where the light line itself is visible, in coves, on shelf edges and in furniture, so the quality of the line matters as much as the colour range. Dense COB construction gives a continuous visual line without the visible LED points of a conventional strip, so colour effects stay even when the strip is viewed up close.

That dot-free line is the main reason to choose COB over a conventional pixel strip for close-view installations. In a cove or under a shelf, the viewer sees the strip itself, and a spotted line breaks the effect. The same continuous line suits display cases, architectural outlines and furniture lighting, where the strip is part of the finished look rather than hidden behind a diffuser. A diffuser can hide the individual points of a conventional strip, but it also dims the output and adds a part to the installation; a dot-free COB line needs no diffuser to look continuous.

For a project order, start from the installation: the colour system, the total length and the controller. Pre-production sample verification is available before volume orders, so the colour, the effect and the appearance of the line can be checked on a sample of the exact configuration before the full order is placed.

Samples are the simplest way to settle the choice. A short length of the exact model, driven by the intended controller, shows the colour, the dot-free line and the effect at real viewing distance. Sample orders are welcome for the standard products, and pre-production verification can cover key specifications and appearance before a volume order is placed.

Ordering and custom options for COB RGB / RGBW / RGBCCT LED strips

All three standard models in these COB RGB / RGBW / RGBCCT LED strips run on 24V DC, and there is no minimum order for the standard products. Sample orders are welcome, and pre-production sample verification of key specifications and appearance is available before volume orders. That makes it straightforward to check a colour system on a real sample before committing to a project quantity.

Project-specific requirements can be configured: voltage, CCT or colour, cable length, cable exit direction, connector and packaging, with OEM requirements quoted case by case. CCT, CRI, length, waterproof rating and packaging can be customised, and each custom request is quoted on its own details rather than from a fixed list. Tell us the installation length as well, because the length decides the power feed and the number of feed points, and a long run should be verified on a sample before the full order is placed.

To ask for a quote, tell us the colour system, voltage and installation length you need. We will help you choose the right COB RGB / RGBW / RGBCCT LED strips for your project and confirm which options apply before samples are arranged.

Every project order for COB RGB / RGBW / RGBCCT LED strips is quoted on its own details, so the quotation reflects the exact configuration, length and options in your enquiry. Include the colour system, the installation length and the controller when you ask, and we can confirm the configuration, the sample and the next step before a volume order is discussed.

COB RGB / RGBW / RGBCCT LED strips — lit RGBW LED strip coil

Frequently Asked Questions

What is the difference between RGB, RGBW and addressable COB strips?

In these COB RGB / RGBW / RGBCCT LED strips, an RGB strip changes colour across the whole strip. RGBW adds a dedicated white channel to programmable colour effects for more flexible scenes. The addressable RGB and RGBW COB strips use SPI control for programmable, dynamic colour effects with a smooth, dot-free light line.

What controller do these strips need?

The 5 mm RGB strip in these COB RGB / RGBW / RGBCCT LED strips uses RGB control, and the addressable RGB and RGBW strips use SPI control. Addressable projects should confirm the controller, data protocol, grouping or pixel configuration before ordering, and pre-production testing with the intended controller and installation length is recommended.

Can HST Light customise these strips for a project?

Yes. For COB RGB / RGBW / RGBCCT LED strips, HST Light supports project-specific voltage, CCT or colour, cable length, cable exit direction, connector and OEM requirements. CCT, CRI, length, waterproof rating and packaging can be customised, and OEM projects are quoted case by case.

Can I order samples before mass production?

Yes. HST Light supports pre-production sample verification of key specifications and appearance before volume orders. There is no minimum order for these standard products, and sample orders are welcome.

What is RGBCCT, and is it a standard model here?

RGBCCT combines RGB colour with a tunable white (CCT) channel, so one strip can produce colour scenes and adjustable white light. An RGBCCT model is not listed as a standard product in these COB RGB / RGBW / RGBCCT LED strips. If your project needs RGB plus a tunable white channel, tell us the CCT range you need and we can discuss a custom configuration.

Talk to HST Light About Your Project

Tell us the colour system, voltage and installation length you need, and we will help you choose the right COB RGB / RGBW / RGBCCT LED strips for your project.